*Please note that installation is not provided. You may follow the simple installation guide provided below*

Purchase Include

• Canvas Wall Art with Frame
• 3 x Black Mounting Bracket
• 7 x Small Screws
• 3 x Wall Plugs
• 3 x Cement Nails
• 3 x Wall Mounts

The additional pieces are included for your convenience.

Key Features

• Printed on environment friendly canvas painting poster. Provide high quality and definition on advanced canvas.
• Create a pleasant, relaxed atmosphere at home with beautiful decor.
• Easy installation. All you need to do is unwrap, screws the mounting brackets and hang up this beautiful piece in your room.
• Canvas wall art is the prefect gift for any occasion. An optimal choice for Thanksgiving, Birthday, Housewarming or Christmas gift.

Dimension

• L 70 x H 50cm (2.3kg)

Installation Guide

1. Use a Screwdriver and Small Screws to fix the Mounting Brackets on the top portion at the back of the art piece.
   Each art piece is to be fixed with 2 Mounting Brackets.
2. Lean the art piece against the wall and use a pencil to mark the points of the 2 Mounting Brackets.
3. Ensure the marks made in step 2 are level to the ground.

Using Wall Plugs

1. Drill a pilot hole into the wall at each point made in Step 2. Position the drill at a right angle (90°) and slowly drill a hole that is long enough to fit the Cement Nail provided.
2. Insert a Wall Plug into each pilot hole. Push it in till the head of the Wall Plug is flush against the wall. *Note that the wall plug must fit snugly into the hole, as a loose wall plug will not be able to provide a firm grasp on the cement nail.*
3. Fit the Cement Nail through the Mounting Bracket, and gently twist it into the Wall Plug.
4. Fully tighten the Cement Nails into the Wall Plugs before fixing the Mounting Brackets on the Cement Nails, and the installation of your art piece is complete.

Without Wall Plugs

1. Drill the Cement Nails directly into the wall at each point made in Step 2. You may choose to drill it perpendicularly (90°) or angled (45°).
2. Fix the Mounting Brackets on the Cement Nails and the installation of your art piece is complete.

Using Wall Mounts

1. Determine where you want to mount your art piece and use a pencil to make a mark on the wall, aligned to the centre of the top and bottom of your art piece.
2. Position the Wall Mount on the points made in the previous step and firmly hammer the nails in.
3. Check to ensure that the channels are parallel to the ground and fully tighten the nails into the wall.
4. Slide your art piece into the channels from the side, and the installation of your art piece is complete.

Care Instruction

• Gently swab/wipe the canvas with clean white damp cloth or wet tissue
• Gently wipe the frame with clean damp cloth and wipe it dry

Notes

• Installation/Assembly is not provided by FortyTwo. Self-assembly required.
• Do check thoroughly the wall art front and back are in good condition before installing. The wall art might get defect during transit, contact us immediately.
• Product may vary slightly from image due to photoshoot lighting conditions and screen settings.