Rescue other cars with our Faira Clock for an adventure along the road. The cute tow truck clock is ideal for a car lover's room and will brighten up the walls with its happy yellow color. The Cone is a pendulum, swaying in motion that is sure to add a little whimsy to any child's room.

Purchase Include

• 1 x Clock Face
• 1 x DIY Clock Hands Set
• 1 x Clock Movement
• 1 x Hook

Key Features

• Highly accurate at keeping time as it is fitted with a quartz movement.
• No disturbing ticking sounds with the silent quartz clock movement.
• Made of 3mm eco-friendly PVC foaming board.
• The clock is light weight and can be powered by 1 x AA Battery. Suitable for kid's room or give it for gift.

Notes

• The clock is come uninstalled, require self-assembly.
• Batteries are sold separately; 1pc LR6 AA 1.5V required.
• Recommend to use alkaline batteries in the clock
• The hands are set using the dial on the back of the clock mechanism. Moving the hands directly with your fingers can destroy the clock mechanism.
• If there is no movement after you correctly install the battery, please swing the pendulum by hand gently. It will then start swing. 

Installation Guide

• After opening the packaging, remove the Hex nut and Brass washer from the clock movment. 
• Insert the center shaft of the clock movement through the center hole of the clock face. The battery compartment should be at the bottom.
• A portion of the thread bushing of the center hand shaft should stick out through the front surface of the clock face. Place the washer over the center hand shaft and fix the hex nut firmly.
• The shorter hour hand can be pushed onto the hour hand shaft. The hour hand will be mounted at the 12 o'clock position.
• Mount the longer minute hand. The minute hand should also point at the 12 position, rotate the minute hand clock wise to the 12 position. When adjusting the minute hand, you may find that the hour hand may move from 12. If need be, you can pull off the hour hand and re-mount it so that it points to 12.
• With the minute hand mounted, secure the hand with the cap nut provided. The cap nut simply threads onto the end of the minute hand shaft. Take a moment to use the time-set knob to rotate the hands to ensure they have proper clearance with each other.
• You have successfully mounted your clock movement, all that remain is to insert the battery and set the time.
• Keep in mind that disassembly of the clock movement will reflect the preceding assembly step in reverse.